What do those numbers on the side of the tire actually mean? Understanding Aspect Ratio Dirt bike tire sizes are most often expressed on the sidewall of the tire with a series of numbers separated by a slash mark ( / ) and then a dash behind the second number ( – ) before the final number, which corresponds to the rim diameter size. This site attempts to decode the serial number, and if it is 'M zero D five zero two' then the decoded result is. Your bike is an original Chicago Schwinn. Unfortunately the serial number you entered was used twice by Schwinn meaning there are two possible dates for your bike. Built: 08/13 to 08/23 of 1954. Built: 09/06 to 09.
Gene from genesbmx.com web site provided this great info on figuring out your old trusty Schwinn;
Schwinn Bike Dating After 1965,
Schwinn serial number sequences, while appearing to be
confusing on first sight, follow several general rules. If the
first letter is a 'A' through 'M' it refers to production month
('A' = January, 'B' = February, etc.).
The letters 'I' and 'O' are not used, to avoid mistaking
them for numbers. If there is only one letter in the first two
positions, the first number or two numbers refer to production
year. Date Codes occupy the first two, three or four positions
in a serial number.
Mass produced Schwinn bikes have been followed
by a production month letter and several numbers, the
first two signifying year of production (81 = 1981, etc.).
Example: D72130 = April 1972. LeTour (and Super LeTour)
numbers (1978-80 and 1982 on) include the letter 'S'
with year of production (8 = 1978, 0 = 1980). Example:
SC94653 = March, 1979. Sting 20' racing bikes have a
production month letter 'T' signifying that it is a tri-oval
frame (with three frame tube ends ovalized). Example:
F1T20404 = June, 1981.
Imported Schwinn serial sequences depend upon country
of origin. Bicycles from Japan have a production month
letter in either the first or second position and a production
year number in the other (first or second) position. Examples:
J677123 = September, 1976. Taiwanese imports have a
separate date code number on the right rear fork end that
includes the letter 'G' followed by a two-digit month code
(01 = January etc.) and two more digits for the production
year (80 = 1980 etc.). Example: G04813 = April 1981.
Also Note that if your bike is after year 2001 the
Schwinn/Questor bankruptcy, It has been found
that ( Pacifc Cycle ) bikes do not use this dating.
Also See: The Schwinn BMX Catalogs Time Line Web Page:
( http://genesbmx.bmxair.com/schwinn/catalogs/bmx.html )
CC - Gene`s BMX Schwinn Page
http://www.genesbmx.com/SchwinnPage.html
Frequently Asked Questions About Schwinn BMX Bicycles.
02 - What Year Is My Schwinn BMX Bike?
Wheel sizes don’t make very much sense; there, I said it. I wish someone had sat me down and told me that at the very beginning.
In this article, I’ll try my very best to explain what the common mountain bike wheel and tire sizing systems are, and how to understand them.
Before we get started, here’s a good indicator of how ridiculous wheel sizes are: can you guess what the C in 700C means?
That’s right, nothing at all. It remains as a carry-over from an old French sizing system, because, well, that’s the bike industry for you. We’ll cover this a bit more later on.
Thankfully, these days, we have ISO (formerly ETRTO), which gives us a number that looks like 30-584 on both rims and tires. We can use this to make sure the tire and rim are a good match for each other, and we don’t have to worry about fractions and decimals.
In this day and age, you can almost definitely get by with just a decent understanding of ISO sizing, so if that’s all you’re after, feel free to jump ahead to our ISO sizing section.
- 1 Which Mountain Bike Tire Size Should I Use and Why?
- 2 What do 26in, 27.5in, and 29in Actually Mean?
- 3 What’s the Difference Between 26″, 27.5″ and 29″ Mountain Bike Wheels?
- 3.1 What about 650B and 700C. What do they Mean?
- 4 Standards, standards, standards
- 4.1 ISO / ETRTO Sizing
- 4.2 French Sizing
- 4.3 Inch markings / Fractional
- 5 A Quick Conclusion
Which Mountain Bike Tire Size Should I Use and Why?
The most common question I receive regarding mountain bike wheel sizes is: which size is best to use, and why?
Thankfully, this is quite a straightforward line of questioning for wheel sizes, so we’ll get this out of the way early on.
For most people, 27.5″ mountain bike wheels are the best choice. They’re the de-facto standard today because they provide much of the benefits of the larger 29″ wheel, but with a fraction of the weight penalty.
To illustrate this, I’ve condensed the information that Giant Bicycles made available regarding 27.5″ wheels into this handy graphic that shows why 27.5″ gives you the best of both worlds:
You can click the image above to open in a new tab.
What do 26in, 27.5in, and 29in Actually Mean?
The sizes you commonly see for mountain bike wheels, like 26in, 27.5in and 29in, all refer to the outside diameter of the wheel with the tire fully inflated.
These sizes can be thought of as a sort of shorthand for decimal sizes, each with a corresponding ISO measurement.
For example, wherever you see a wheel advertised as 26″, it’s almost always the equivalent to the decimal size 26×1.0 and has an ISO bead seat diameter of 559mm.
Hopefully, that last paragraph will make a bit more sense later when we’ve covered the different sizing systems.
One of the first points worth drilling home is that these aren’t accurate measurements at all; they’re just approximations that are used as labels.
The true diameter of a wheel measured tire-edge to tire-edge will differ quite a bit depending on the rim width, the tire pressure, and plenty of other factors.
This inaccuracy is especially true of 27.5″ wheels because the name 27.5″ doesn’t derive from the diameter of the wheel at all. The term 27.5″ is more of a marketing label intended to show that they are halfway between 26″ and 29″ in terms of performance.
You might be asking yourself, “Why?! Why on earth would they do it like that?” and that’s a sensible thing to ask. At least I hope it is, because I ask myself the same question regularly.
What’s the Difference Between 26″, 27.5″ and 29″ Mountain Bike Wheels?
In case the graphic above hasn’t done enough to quench your thirst for understanding, lets quickly touch on each wheel size and explain why and where they’re used.
- 26″ mountain bike wheels were the old standard. For years, 26″ wheels were the only option for mountain bikes, until 29″ wheels came along and changed the game completely. Today, they still find their place on children’s bikes, bikes for smaller riders, and on more aggressive bikes that require lighter tires for better control.
- 27.5″ mountain bike wheels are the new standard. They’re often also referred to as 650B, which we’ll touch on more in the section on French sizing. You’ll find these wheels on a majority of the new bikes released today. They offer an excellent balance between grip, rolling resistance, weight, and acceleration.
- 29″ mountain bike wheels are heavier and accelerate slower, but have a larger contact patch, meaning they have superior grip. A lower angle of attack due to the larger wheel circumference also makes them far more efficient at rolling over obstacles, leading to a smoother ride quality when compared to the other two sizes.
What about 650B and 700C. What do they Mean?
In terms of mountain bike wheels, 650B is a standard 27.5″ wheel, and 700C is a standard 29″ wheel.
These size labels come from an old French sizing standard, which we’ll cover in more detail in the French sizing section.
Standards, standards, standards
As the saying goes, the great thing about standards is that there are so many to choose from.
So far, we’ve talked about standard size labels (26″), which are shorthand for the decimal sizes, and touched on French sizes (650B). But when it comes to measuring up tires and rims, there’s plenty more to worry about.
Before we go down the rabbit hole of the sizing systems, let’s count our blessings that most, if not all, modern tires and rims come with ISO sizes on them.
What Does My Bike Serial Number Mean
We’re going to look at ISO sizing first. Unless you feel like torturing yourself with understanding the other sizes and how they relate to each other, you’re almost definitely going to be ok by just relying on ISO.
ISO / ETRTO Sizing
ISO is the international sizing standard for bike tires and rims, and boy is it a lifesaver. Initially created by the European Tyre and Rim Technical Organisation (ETRTO), it replaces the other archaic sizing systems and removes all the overlapping and annoyances that come with them.
ISO sizing is the most intuitive, the easiest to compare, and the most commonly adopted sizing system today.
The following diagram depicts how ISO measurements are interpreted on bike rims. You can click on the image to open in a new tab.
The ISO sizing system provides a measurement that looks like 30–584, which you’ll find on both rims and tires. Both numbers are millimeter measurements.
The first number, 30, represents a different measurement on tires than it does on rims.
- On a rim, 30 represents the inner width between the flanges in millimeters, as demonstrated in the accompanying diagram for this section.
- On a tire, 30 represents the inflated tire width in millimeters.
The second number, 584, is universal between tires and rims. It represents the Bead Seat Diameter (BSD) in millimeters.
If the second numbers match on a tire and a rim, the tire will likely fit the rim (with a few exceptions related to dramatic differences in width).
If these numbers don’t match, there’s a very good chance it won’t fit.
While there are variants to each size, here are the most common ISO Bead Seat Diameter measurements for mountain bike wheels:
| Decimal | ISO (BSD) |
|---|---|
| 26 (x1.00) | 559mm |
| 27.5 | 584mm |
| 29 | 622mm |
French Sizing
Sizes such as 700C and 650B come from an old French sizing system, where the number represents the outside diameter in millimeters.
The letter used to denote the width, though today, it is meaningless since you can get either 700C or 650B tires in varying degrees of narrowness.
With French measurements and mountain bike tires, all you really need to know is that 650B = 27.5″ and 700C = 29″. There are French sizes for variants of the 26″ wheel; however, the most common 26″ wheel, which is denoted by 26×1.0, or 559mm BSD, does not have a designated French size.
Here they are in a table to make them a little easier to comprehend.
| Decimal | ISO (BSD) | French |
|---|---|---|
| 26 (x1.00) | 559mm | N/A |
| 27.5 | 584mm | 650B |
| 29 | 622mm | 700C |
You can also find varying widths denoted as 700x30C etc. While 700C alone usually means 40-622 in ISO notation, 700x30C would be 30-622. You’re unlikely to see these too often outside of road bikes, though.
Inch markings / Fractional
With mountain bikes, you’re mostly safe from fractional sizes, but it’s worth mentioning them for completeness.
Measurements like 26×1½ (which is the 27.5″ size) and 28x(two fractions) (which is the 29″ size) are fractional inch markings.
It’s important to note that you cannot mix fractional markings with decimals.
As a general rule, decimal (26 x 1.75) and fractional (26 x 1 3/4) sizes are not the same, despite being mathematically identical.
A Quick Conclusion
Some key takeaways from this article:
Search Bikes By Serial Number
- Count your blessings before bed every night that you live in a time where the ISO sizing system exists, and stick with it whenever you can.
- For ISO sizes (30-584), both numbers represent millimeters. The first number represents the width of the inflated tire when found on a tire, or the inner width between the flanges when found on a rim. The second number is always the Bead Seat Diameter (BSD) and should match on both rim and tire.
- Decimals (26×1.75) are not interchangeable with Fractions (26×1¾) despite being mathematically identical.
- The French sizing system is crazy, outdated, and the letters are essentially meaningless today.